geekvape b100 manual

Geekvape B100 Manual⁚ A Comprehensive Guide

This comprehensive guide will walk you through everything you need to know about the Geekvape B100, from unboxing and setup to advanced features and troubleshooting. The B100 is a powerful and versatile pod mod, offering a range of features and performance options for vapers of all levels. Whether you’re a beginner or a seasoned vaper, this manual will help you maximize your experience with the Geekvape B100.

Introduction

The Geekvape B100, previously known as the Aegis Boost Pro 2, is a powerful and durable pod mod kit designed for vapers who want a balance of performance and portability. It features a tri-proof design, making it resistant to water, dust, and shocks. With a maximum output of 100W, the B100 is capable of delivering satisfying clouds and flavor. This manual will serve as your guide to navigating the B100’s features, from its intuitive interface to its advanced settings.

Key Features and Specifications

The Geekvape B100 boasts a range of impressive features that make it a standout pod mod. Here are some of its key highlights⁚

• Tri-proof Design⁚ The B100 is IP67 rated, meaning it’s resistant to water, dust, and shocks, ensuring durability and reliability in various environments.
• AS-Chip 3.0⁚ The B100 utilizes the advanced AS-Chip 3.0, providing fast firing speeds, precise temperature control, and overall enhanced performance.
• Leakproof Pod Cartridge⁚ The B100 features a leakproof 4.5mL pod cartridge, offering ample e-liquid capacity and minimizing the risk of leaks.
• Adjustable Airflow⁚ The B100 offers adjustable airflow control, allowing you to fine-tune your vaping experience from restricted MTL to open DTL draws.
• Single 18650 Battery⁚ The B100 is powered by a single 18650 battery (sold separately), providing ample power for sustained vaping sessions.
• Multiple Modes⁚ The B100 offers multiple vaping modes, including Power, Bypass, TC-TCR, and VPC, allowing you to customize your vaping experience according to your preferences.

Unboxing and Setup

Unboxing the Geekvape B100 is an exciting experience. You’ll find the device itself, a spare pod, a user manual, a USB-C charging cable, and a warranty card. Before you start vaping, follow these simple setup steps⁚

1. Insert the Battery⁚ Open the battery compartment door on the bottom of the device, insert your 18650 battery (not included), and close the door securely.
2. Install the Pod⁚ Press the latch on the side of the device and slide the pod cartridge into place. Make sure it clicks securely.
3. Install the Coil⁚ Remove the pod from the device and unscrew the coil at the bottom. Install the desired coil (0.6ohm for DTL or 1.2ohm for MTL), ensuring it’s screwed in tightly.
4. Fill the Pod⁚ Using the fill port on the side of the pod, carefully fill it with your preferred e-liquid. Avoid overfilling the pod.
5. Power Up⁚ Press the fire button five times quickly to turn on the device. The screen should light up, displaying the battery level and current wattage.

Now you’re ready to start vaping!

Battery Installation and Charging

The Geekvape B100 runs on a single 18650 battery, which is not included in the package. It’s crucial to use a high-quality battery with a recommended discharge rate for optimal performance and safety. To install the battery⁚

1. Open the Battery Compartment⁚ Locate the battery compartment door at the bottom of the device and slide it open.
2. Insert the Battery⁚ Insert the positive (+) end of the battery into the compartment, ensuring it aligns correctly with the contacts.
3. Close the Compartment⁚ Slide the battery compartment door closed securely.

To charge the battery, use the included USB-C cable and connect it to a wall adapter or computer. The B100 features a pass-through charging function, meaning you can vape while the battery is charging. The device’s screen will display the charging status. Always charge the battery in a well-ventilated area and avoid overcharging.

Pod Cartridge and Coil Installation

The Geekvape B100 utilizes a leak-proof B100 Pod Cartridge with a 4.5mL e-liquid capacity. The pod is designed to work with Geekvape’s P Series coils, which are available in various resistances to cater to different vaping styles. Here’s how to install the pod and coil⁚

1. Remove the Pod⁚ Pull the pod out of the device by gently pulling it upwards.
2. Insert the Coil⁚ Unscrew the bottom of the pod and install the desired P Series coil. Make sure the coil is screwed in tightly.
3. Prime the Coil⁚ Drip a few drops of e-liquid directly onto the cotton of the coil to saturate it. This helps prevent dry hits and ensures optimal flavor.
4. Insert the Pod⁚ Align the pod with the magnetic contacts on the device and push it in until it clicks into place.

It’s important to allow the coil to soak in e-liquid for a few minutes after installation to prevent dry hits. Once the coil is properly primed and the pod is securely attached, you’re ready to start vaping!

Adjusting Wattage and Modes

The Geekvape B100 offers a variety of wattage and mode settings to customize your vaping experience. The device features a user-friendly interface and intuitive button controls for adjusting these settings. Here’s a breakdown of the key features⁚

• Variable Wattage Mode⁚ This is the most common mode, allowing you to manually adjust the power output (wattage) to your preference. You can adjust the wattage from 5W to 100W using the adjustment buttons on the device.
• Bypass Mode⁚ In Bypass mode, the B100 delivers the full power output of the battery directly to the coil, providing a more direct and powerful vaping experience.
• Temperature Control (TC) Modes⁚ The B100 also supports temperature control modes, allowing you to set a specific temperature for your coil. This helps prevent overheating and ensures consistent vapor production.

To adjust the wattage or select a different mode, navigate through the device’s menu using the adjustment buttons. The display screen will guide you through the process. Refer to the Geekvape B100 user manual for detailed instructions on adjusting wattage and selecting modes.

Airflow Control

The Geekvape B100 features a sophisticated airflow control system that allows you to fine-tune the amount of air that reaches your coil. This affects the overall vaping experience, influencing the vapor production, draw resistance, and flavor delivery.

• Adjustable Airflow⁚ The B100’s airflow control is located on the side of the device, allowing you to adjust the air intake by rotating a dial. This dial offers a range of settings, from a tight, restricted draw to a wide-open, unrestricted airflow.
• Customization⁚ Experimenting with different airflow settings allows you to find your preferred draw style. A tighter airflow creates a denser cloud and a more restricted draw, while a wider airflow produces a looser draw and a larger cloud.
• Flavor Enhancement⁚ Airflow also plays a role in flavor delivery. A tighter airflow concentrates the vapor, enhancing the flavor of your e-liquid.

Adjusting the airflow is a simple process. Rotate the airflow control dial to your desired setting. You’ll notice the difference in the draw resistance and vapor production as you change the airflow settings.

Filling the Pod

The Geekvape B100 uses a refillable pod system, making it easy to switch flavors and enjoy your favorite e-liquids. Here’s how to fill your pod⁚

1. Remove the Pod⁚ Press the release button on the side of the device to detach the pod.
2. Locate the Fill Port⁚ The fill port is located on the side of the pod. Remove the silicone plug to reveal the fill port.
3. Fill the Pod⁚ Carefully pour your desired e-liquid into the fill port, avoiding overfilling. The B100 pod has a 4.5mL capacity, so you can enjoy extended vaping sessions.
4. Replace the Plug⁚ Once filled, ensure the silicone plug is securely replaced to prevent leakage.
5. Wait for Saturation⁚ After filling, allow the e-liquid to fully saturate the coil for optimal flavor and performance. This typically takes a few minutes.

It’s important to avoid overfilling the pod, as this can lead to leakage. Always ensure the fill port is properly sealed after filling to prevent any spills or leaks.

Troubleshooting

While the Geekvape B100 is a reliable device, you might encounter some common issues. Here are some troubleshooting tips⁚

• No Atomizer Detected⁚ If you see a flashing red light three times, it means the device isn’t detecting the atomizer. Make sure the pod is securely connected and try replacing the coil;
• Low Battery⁚ A flashing red light five times indicates a low battery. Charge the battery fully and try again.
• Leaking⁚ If your pod leaks, ensure the fill port is properly sealed and avoid overfilling. Also, make sure the coil is properly installed and not damaged.
• Weak Flavor⁚ If you experience weak flavor, try replacing the coil with a fresh one. Also, ensure the airflow control is adjusted to your preference.
• Device Not Turning On⁚ If your B100 won’t turn on, try pressing the fire button five times rapidly. If this doesn’t work, check the battery connection and ensure it’s properly charged.

If you continue to experience issues despite troubleshooting, it’s recommended to contact Geekvape support for further assistance.

Cleaning and Maintenance

Regular cleaning and maintenance are crucial for keeping your Geekvape B100 in optimal condition and extending its lifespan. Here’s a step-by-step guide⁚

1. Clean the Pod⁚ Remove the pod from the device and empty any remaining e-liquid. Rinse the pod with warm water, making sure to avoid getting water into the airflow slots or coil. Allow it to air dry completely before reinserting.
2. Replace the Coil⁚ Coils have a limited lifespan and need to be replaced periodically. When you notice a decline in flavor, a burnt taste, or decreased vapor production, it’s time for a new coil.
3. Wipe the Device⁚ Use a microfiber cloth to wipe down the exterior of the device, removing any dust, fingerprints, or e-liquid residue. Avoid using harsh chemicals or abrasive materials that could damage the device’s finish.
4. Clean the Battery⁚ If you use a removable battery, periodically clean the battery contacts with a cotton swab dipped in isopropyl alcohol. Make sure the contacts are completely dry before reinserting the battery.
5. Storage⁚ When not in use, store your Geekvape B100 in a cool, dry place. Avoid storing it in direct sunlight or extreme temperatures.

By following these simple maintenance tips, you can ensure your Geekvape B100 performs flawlessly for a long time.

FAQ

Here are some frequently asked questions about the Geekvape B100⁚

1. What kind of battery does the Geekvape B100 use? The Geekvape B100 uses a single 18650 battery, which is not included in the kit. You’ll need to purchase a compatible battery separately.
2. How do I change the wattage on the Geekvape B100? You can adjust the wattage by pressing the “+” or “-” buttons on the device. The wattage range for the B100 is between 5 and 100 watts.
3. What is the difference between the Geekvape B100 and the Geekvape B60? The Geekvape B100 is a more powerful and feature-rich version of the Geekvape B60. It has a higher wattage output, a larger display screen, and a more advanced chipset.
4. How do I know if my coil is burnt? If you experience a burnt taste, decreased vapor production, or a dry hit, your coil may be burnt. It’s important to replace the coil if this happens.
5. How do I clean my Geekvape B100? You can clean your Geekvape B100 using a microfiber cloth and warm water. Avoid using harsh chemicals or abrasive materials.

If you have any other questions, please consult the Geekvape B100 user manual or contact Geekvape customer support.